Installing the Remote GPS module requires a small modification to your FlightBox case. Here’s the process:

  1. Carefully disassemble the FlightBox, being very careful not to damage the Raspberry Pi while removing the bulkhead connectors.
  2. Remove the U-shaped plastic cut-out from the end of the case (see the video below).
  3. If necessary, remove the existing GPS module from the Raspberry Pi assembly.
  4. Plug the USB cable from the remote GPS into the top center USB port. (See video below.)
  5. Reassemble your FlightBox.

Modifying Your Case

Assemble FlightBox With Remote GPS